|
|
Post by Mad Mike on May 19, 2017 13:58:01 GMT -5
I haven't posted in a loooong time, but I am having issues with the spine art and was wondering if others were having the same issue. I have everything printed and ordered a box of 1/2" binders from Staples, but I cannot for the life of me get the spine art all the way in without damaging it aka folding/creasing it up. I have it printed on thick paper too. Maybe my binders suck or maybe I just don't have the steady, patient hand to do this. Any suggestions are much appreciated! Mad Mike - amazing job on these!!!! I had a hard time with them as well, the half inch size makes the plastic very tight. My ultimate solution was to use the long flat metal rod from a hanging file folder (anything similar should work as well), first to stretch the pocket a bit, and then to help push the spines in. Practice on some scrap paper (I ripped and wrinkled a few at first). Go slow and steady and it should get there. |
|
|
|
Post by spawnshop on May 24, 2017 6:58:43 GMT -5
These are absolutely amazing! I'm going to download the new Adam-geddon and give it a try!!
|
|
|
|
Post by jaywoz360 on Jan 11, 2018 11:47:49 GMT -5
Great work!
The Adam _Geddon link does not work.
Thanks,
|
|
|
|
Post by larzz77 on Feb 12, 2018 12:34:59 GMT -5
30th Anniversary link is dead.
Also, will there be a "We Hate the 80's" binder art? These are so cool. Excellent job.
|
|
C. Darren Rackham
n00b
Looking for a Jolly Roger and/or Pegleg Peter Buyback, cash or trade.
Posts: 7
|
Post by C. Darren Rackham on Mar 9, 2018 8:43:57 GMT -5
I haven't posted in a loooong time, but I am having issues with the spine art and was wondering if others were having the same issue. I have everything printed and ordered a box of 1/2" binders from Staples, but I cannot for the life of me get the spine art all the way in without damaging it aka folding/creasing it up. I have it printed on thick paper too. Maybe my binders suck or maybe I just don't have the steady, patient hand to do this. Any suggestions are much appreciated! Mad Mike - amazing job on these!!!! I had a hard time with them as well, the half inch size makes the plastic very tight. My ultimate solution was to use the long flat metal rod from a hanging file folder (anything similar should work as well), first to stretch the pocket a bit, and then to help push the spines in. Practice on some scrap paper (I ripped and wrinkled a few at first). Go slow and steady and it should get there.
Thank you mike for the work! I originally was using the card guard binders, putting the different OS wrappers in the card view windows, but these are fantastic! Great work.
What I have found that works for the 1/2" and 1" binders is flipping them in reverse, use a letter opener or flat skinny (non-metal) ruler to stretch out the spin a bit. I then use a thinner 'guide' aka chopstick to drive the binder art in down flat. No wrinkles, no damage. Done.
|
|
C. Darren Rackham
n00b
Looking for a Jolly Roger and/or Pegleg Peter Buyback, cash or trade.
Posts: 7
|
Post by C. Darren Rackham on Jun 8, 2018 7:05:45 GMT -5
Mike,
It looks like the spine art for BNS series 3 is missing at the end of the main file.
|
|
|
|
Post by nastynick13 on Jul 18, 2018 20:25:25 GMT -5
Mike, It looks like the spine art for BNS series 3 is missing at the end of the main file. yeah spine art is missing for me too. Also a few are on zip files and I’m on mobile so I can’t send them to my Dropbox for printing..time to get another computer hahah |
|
|
|
Post by ayematey on Jan 1, 2019 7:46:32 GMT -5
Was anyone able to locate or have a link to the spine for BNS3? Also I just wanted to give huge props and thank you to the creator of these!! Simply amazing
|
|
|
|
Post by nickdrista on Jan 30, 2019 16:41:07 GMT -5
Did anyone find the spine art for BNS3? Thanks!
|
|
|
|
Post by rchprncss on Jan 31, 2019 8:37:55 GMT -5
I was wondering if you could make a generic binder for "Rainbows?" I have a binder that all I've put in it is my collection of rainbows.   TIA |
|
|
|
Post by geodio on Sept 30, 2019 19:41:29 GMT -5
Thank you so much Mad Mike. I was holding out hope that you'd continue on with this for we completists out there. I really like the Oh, the Horror-ible! sets, too.
I've looked for a while now but I can't find the 1/2 inch binder spines for OS1-15. It sounds like some people have found them? They don't seem to be in the big original pdf/rar on dropbox. I feel like I've opened all the files but can't locate. Were they created and if so can I be pointed in the right direction (does anyone know)? The 1/2 spines for the Giant Stickers series 1 and 2 also make the most sense if you're willing to take a request and create those too.
The only other thing I have noticed in Brand New Series 3 is missing the binder spine.
My 15 1/2 binders look cool on my shelf, but missing that crucial spine art. I appreciate all that you've done!
|
|
|
|
Post by paulamir on Oct 30, 2019 0:03:37 GMT -5
Wow man! these are amazing. I'm dying to get a series 3 and 4 from the original cards from you.
|
|
|
|
Post by CollectiblesWorkshop on Jan 30, 2020 17:39:53 GMT -5
Has thread moved or is op just mia? Looking for 2019 Series 2 Revenge of Oh The Horrorible and 2020 Series 1 Late to School.
|
|
|
|
Post by paulkeyesjr on Feb 12, 2020 15:54:19 GMT -5
How do print the series 1?
|
|
|
|
Post by CollectiblesWorkshop on Feb 12, 2020 20:56:55 GMT -5
How do print the series 1? Do you mean OS1? You download the entire archive that includes all OS art then use your printer's range function to print the ones you need. |
|
|
|
Post by Mad Mike on Apr 20, 2020 11:40:30 GMT -5
Updated (Finally)!
|
|
gavboi
Cabbage Patch Kid
Posts: 50
|
Post by gavboi on Apr 25, 2020 12:05:45 GMT -5
Hi
It's probably been asked many times...but what binders are the designed to fit?
Great work BTW!
Gavboi
|
|
|
|
Post by Mad Mike on Apr 25, 2020 20:57:56 GMT -5
Hi It's probably been asked many times...but what binders are the designed to fit? Great work BTW! Gavboi The front and back should fit any binder, and I've included several spines to accommodate different sized binders. |
|
|
|
Post by mikelopez755 on Jun 18, 2020 9:37:11 GMT -5
I wanted some artwork to use in each of my card binders, so I set forth to do some photo shopping. These were designed at 8.5x11 inches to print and put in binders or full page plastic sleeves as a "title page", if you will, for each series. Each are designed to match the original wrappers in color and style. Enjoy! Extra special thanks to Travis, Nicodemus (GeePeeKay.com) and Andrew without whom these would not exist!!
UPDATE (04/20/2020): Long overdue: 2019 Series 2 & 2020 Series 1!
Most recent:
PREVIEWS: DOWNLOAD PDF (v.APR01):DOWNLOAD
Card collage versions:UPDATED AND ADDED TO THE 1ST POST |
|
|
|
Post by DaShAkA on Jul 2, 2020 22:57:42 GMT -5
Awesome work..
Did I miss the BNS3 side art somewhere?
If i did, do you have the link?
Thanks Again
|
|
|
|
Post by slyknezz on Jul 31, 2020 9:44:24 GMT -5
Is there something that I need to purchase in order to print these out? I tried already but its just not printing fsr. Any info is much appreciated!
Thank you
|
|
|
|
Post by petronia on Sept 29, 2020 19:28:27 GMT -5
Hello! Really cool art. It seems that the Dropbox links the post on page 4 are dead. I'm really interested in the 1/2 binder spines but I'm getting a 404 error. I don't see a link to them on the 1st page of this thread. Does anyone have a link to the 1/2 inch file?
Thanks!
|
|
TIA
